Publications
Refereed Journal Publications
-
Additive Manufacturing of Stellite 6 Alloy by Laser-directed Energy Deposition: Engineering the Crystallographic Texture
M. Moshkbar Bakhshayesh, F. Khodabakhshi, Mohammad H. Farshidianfar, Š. Nagy, M. Mohammadi, G. Wilde. Materials Characterization, vol 207, 2024.
-
Effect of Heat Treatment on Microstructure and Wear Properties of Laser Additively Manufactured 316 L Stainless Steel/co-cr-w Alloy Part Using Directed Energy Deposition Method
N. Hadian Kaffash, S. Marandi, B. Beidokhti, Mohammad H. Farshidianfar. Materials Today Communications, vol 38, 2023.
-
Investigation of Microstructure and Wear Properties of Stellite 6 Laser Additive Manufactured Layers on Martensitic Stainless Steel Substrate
S. Marandi, B. Beidokhti, M. Sharifi, M. Mousavi, Mohammad H. Farshidianfar. The Journal of The Minerals, Metals & Materials Society (TMS), 2023.
-
Adaptive Thermal Model for Realtime Peak Temperature and Cooling Rate Prediction in Laser Material Processing
R. H van Blitterswijk, L. A. Botelho, Mohammad H. Farshidianfar, P. Etman, A. Khajepour. Journal of Manufacturing Processes, vol 101, pp. 1301-1317, 2023.
-
Nanoindentation Plasticity and Loading Rate Sensitivity of Laser Additive Manufactured Functionally Graded 316l and 410l Stainless Steels
F. Khodabakhshi, Mohammad H. Farshidianfar, AP Gerlich, A Khajepour, V Nagy Trembošová, M Mohammadi, SI Shakil, M Haghshenas. Materials Science and Engineering: A, vol 862, 2023.
-
A Review on the Presence of Lasers in the Processes of Coating, Repair, and Prototyping
Mohammad H. Farshidianfar, Seyed Fariborz Eshraghi, Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar. Metallurgical Engineering, 2022.
-
Dross Formation Modeling in the Laser Beam Cutting Process Using Energy-based and Gas-based Parameters
Seyedeh Fatemeh Nabavi, Mohammad H. Farshidianfar, Anooshiravan Farshidianfar, Saeed Marandi. The International Journal of Advanced Manufacturing Technology, vol 120, pp. 8169-8184, 2022.
-
Bispacer Multi-stage Direct Contact Membrane Distillation System: Analytical and Experimental Study
Morteza Aliabadi, Hassan Ghorashi, Shamim Shokri Motlagh, Seyedeh Fatemeh Nabavi, Seyed Arash Pakzad, Mohammad H. Farshidianfar, Anooshiravan Farshidianfar, Farzaneh Mahmoudi and Aliakbar Akbarzadeh. Processes, vol 9, 2021.
-
Closed-loop Deposition of Martensitic Stainless Steel During Laser Additive Manufacturing to Control Microstructure and Mechanical Properties
Mohammad H. Farshidianfar, F. Khodabakhsi, A. Khajepour, A.P. Gerlich. Optics and Lasers in Engineering, vol 145, 2021.
-
Physical-based Methodology for Prediction of Weld Bead Characteristics in the Laser Edge Welding Process
S. F. Nabavi, Mohammad H. Farshidianfar, A. Farshidianfar, B. Beidokhti. Optik, vol. 241, 2021.
-
Physical-based Methodology for Prediction of Weld Bead Characteristics in the Laser Edge Welding Process
Mohammad H. Farshidianfar, S. F. Nabavi, S. F. Eshraghi. ISME Journal of Mechanical Engineering, 2021.
-
A Review on the Presence of Lasers in the Processes of Coating, Repair, and Prototyping
Mohammad H. Farshidianfar, S. F. Nabavi, S. F. Eshraghi. ISME Journal of Mechanical Engineering, 2021.
-
Investigation Into Effective Parameters on the Kerf Width of Stainless Steel 316 With Analysis of Variance in Fiber Laser Cutting Process
Anooshiravan Farshidianfar, Saeed Marandi, Mohammad H. Farshidianfar, Seyedeh Fatemeh Nabavi. Modares Mechanical Engineering, vol. 21, pp. 11-18, 2021.
-
Fundamental of Laser and Its Applications
Seyedeh Fatemeh Nabavi, Anooshiravan Farshidianfar, Mohammad H. Farshidianfar. ISME Journal of Mechanical Engineering, vol. 28, Issue 4, pp. 61-71, 2020.
-
Closed-loop Control of Microstructure and Mechanical Properties in Additive Manufacturing by Directed Energy Deposition
Mohammad H. Farshidianfar, F. Khodabakhshi, A. Khajepour, A.P. Gerlich. Materials Science and Engineering: A, 140483, 2020.
-
Effects of Laser Additive Manufacturing on Microstructure and Crystallographic Texture of Austenitic and Martensitic Stainless Steels
F. Khodabakhsi, Mohammad H. Farshidianfar, A.P. Gerlich, M. Nosko, V. Trembosova, A. Khajepour. Journal of Additive Manufacturing, vol. 31, 2020.
-
Rapid Prediction of Real-time Thermal Characteristics, Solidification Parameters and Microstructure in Laser Directed Energy Deposition (Powder-fed Additive Manufacturing)
Y. Huang, M. Ansari, H. Asgari, Mohammad H. Farshidianfar, D. Sarker, M. B. Khamesee, E, Toyserkani. Journal of Materials Processing Technology, vol. 274, 2019.
-
Dissimilar Metals Deposition by Directed Energy Based on Powder-fed Laser Additive Manufacturing
F. Khodabakhsi, Mohammad H. Farshidianfar, S. Bakhshivash, A.P. Gerlich, A. Khajepour. Journal of Manufacturing Processes, vol. 43, Part A, pp. 83-97, 2019.
-
Microstructure, Strainrate Sensitivity, Work Hardening, and Fracture Behavior of Laser Additive Manufactured Austenitic and Martensitic Stainless Steel Structures
F. Khodabakhsi, Mohammad H. Farshidianfar, A.P. Gerlich, M. Nosko, V. Trembosova, A. Khajepour. Materials Science and Engineering: A, vol. 756, pp. 545-561, 2019.
-
Thermal Monitoring of Microstructure and Carbide Morphology in Direct Metal Deposition of Fe-ti-c Metal Matrix Composites
Ali Emamian, Mohammad H. Farshidianfar, Amir Khajepour. Journal of Alloys and Compounds, vol. 710, pp. 20-28, 2017.
-
Real-time Monitoring and Prediction of Martensite Formation and Hardening Depth During Laser Heat Treatment
Mohammad H. Farshidianfar, Amir Khajepour, Adrian Gerlich. Journal of Surface and Coatings Technology, vol. 315, pp. 326-334, 2017.
-
Effect of Real-time Cooling Rate on Microstructure in Laser Additive Manufacturing
Mohammad H. Farshidianfar, Amir Khajepour, Adrian Gerlich. Journal of Materials Processing Technology, vol. 231, pp. 468-478, 2016.
-
Real-time Control of Microstructure in Laser Additive Manufacturing
Mohammad H. Farshidianfar, Amir Khajepour, Adrian Gerlich. The International Journal of Advanced Manufacturing Technology, vol. 82, Issue 5, pp. 1173-1186, 2016.
-
Mode Count and Modal Density of Isotropic Circular Cylindrical Shells Using a Modified Wavenumber Space Integration Method
Mohammad H. Farshidianfar, Anooshiravan Farshidianfar, Mahdi Mazloom Moghadam. ASME Journal of Vibration and Acoustics, vol. 136, Issue 4, pp. 041004-041004-13, 2014.
-
Exact Analysis of Resonance Frequencies and Mode Shapes of Isotropic and Laminated Composite Cylindrical Shells, Part I: Analytical Studies
Pouria Oliazadeh, Mohammad H. Farshidianfar, Anooshiravan Farshdianfar. Journal of Mechanical Science and Technology (JMST), vol. 27, Issue 12, pp. 3635-3643, 2013.
-
Exact Analysis of Resonance Frequencies and Mode Shapes of Isotropic and Laminated Composite Cylindrical Shells, Part Ii: Parametric Studies
Pouria Oliazadeh, Mohammad H. Farshidianfar, Anooshiravan Farshdianfar. Journal of Mechanical Science and Technology (JMST), vol. 27, Issue 12, pp. 3645-3649, 2013.
-
Exact Analysis of Resonance Frequencies of Simply Supported Cylindrical Shells
Anooshiravan Farshdianfar, Pouria Oliazadeh, Mohammad H. Farshidianfar. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 7, Issue 4, pp. 756-762, 2013.
-
Vibration Analysis of Long Cylindrical Shells Using Acoustical Excitation
Anooshiravan Farshidianfar, Mohammad H. Farshidianfar, Malcolm J. Crocker, Wesley O. Smith. Journal of Sound and Vibration (JSV), vol. 330, Issue 14, pp. 3381-3399, 2011.
-
Applications of Nanotechnology in Mechanical Engineering: Part 1
Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar. ISME Journal of Mechanical Engineering, vol. 19, Issue 74, pp. 80-91, 2011.
-
Applications of Nanotechnology in Mechanical Engineering: Part 2
Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar. ISME Journal of Mechanical Engineering, vol. 19, Issue 75, pp. 16-28, 2011.
Refereed Conferance Publications
-
Simulation of Laser Weld Melt Pool Using Ansys Fluent Software
M. Ghamari, P. Oliazadeh, Mohammad H. Farshidianfar. 31st Annual International Conference of Iranian Society of Mechanical Engineers (ISME), 2023.
-
Analysis of Sheet Metal Titanium Laser Welding Shielding and Its Effects on Mechanical Properties
Mahyar Khajezadeh, Fariborz Eshraghi, Mohammad H. Farshidianfar. 31st Annual International Conference of Iranian Society of Mechanical Engineers (ISME), 2023.
-
Extraction of Three-dimensional Profile of Deposition Geometry Using Laser Line Scanning in Laser Metal Deposition Process
S. Esfandiari, Mohammad H. Farshidianfar, S. Nejati Eghteda. 19th Iranian Conference of Manufacturing Engineering (ICME), 2023.
-
Simulation of the Forming Process and the Spring Back Effect of the Spacer Piece in Mist Eliminators Using the Finite Element Method
A. Shouri, S. M. H. Mousavi, P. Oliazadeh, Mohammad H. Farshidianfar. 19th Iranian Conference of Manufacturing Engineering (ICME), 2023.
-
Aluminum to Copper Dissimilar Laser Joint Using Stainless Steel 316l Bimetal
Fariborz Eshraghi, S. Fatemeh Nabavi, Mohammad H. Farshidianfar, Anooshiravan Farshidianfar. 30th Annual International Conference of Iranian Society of Mechanical Engineers (ISME), 2022.
-
Experimental Analysis of the Physical Parameter Effect on the Clad Thickness of Steam Blade Turbine in Laser Cladding Process
Saeed Marandi, Seyedeh Fatemeh Nabavi, Mohammad H. Farshidianfar, Anooshiravan Farshidianfar, Javad Jahanpour, Behrooz Beidokhti, Mohammad Shojaati. 17 th National and 6th International Conference of Manufacturing Engineering (ICME), 2021.
-
The Effect of Wabble Mode on the Geometric and Metallurgical Properties of the Edge Joint in the Laser Wabble Welding Process
R. Esmaeili, S.F. Nabavi, Mohamad. H. Farshidianfar, A. Farshidianfar. 22nd National Conference on Surface Engineering and 6th Conference on Laser Material Processing, 2021.
-
Closed-loop Laser Processing Using a Thermal Camera
Mohammad H. Farshidianfar, Amir Khajepour, Adrian Gerlich. CWA Conference on Welding Technologies for the Automotive Industry, 2017.
-
Control on Microstructure Development and Carbide Morphology of Laser Additive Manufactured Fe-ti-c Metal Matrix Composites Using Real-time Cooling Rate Measurements
Ali Emamian, Mohammad H. Farshidianfar, Amir Khajepour. Canadian Materials Science Conference, 2016.
-
Clad Height Control in Laser Cladding Using a Nonlinear Optimal Output Tracking Controller
Mohammad H. Farshidianfar, Amir Khajepour, Saeid Khosravani, Adrian Gerlich. 32nd International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2013.
-
System Identification and Height Control of Laser Cladding Using Adaptive Neuro-fuzzy Inference Systems
Mohammad H. Farshidianfar, Amir Khajepour, Meysar Zeinali, Adrian Gerlich. 32nd International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2013.
-
Mode Count and Modal Density of Acoustical Cavities: Bars, Plates and Cylindrical Shells
Anooshiravan Farshidianfar, Mohammad H. Farshidianfar. Proceedings of the 20th International Congress on Sound and Vibration (ICSV 20), 2013.
-
Transverse Vibration of Fluid Conveying Carbon Nanotubes Embedded in Two-parameter Elastic Medium
Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar. Proceedings of the 18th International Congress on Sound and Vibration (ICSV 18), 2011.
-
Vibration Analysis of Drug Delivery Cnts Using Transfer Matrix Method
Anooshiravan Farshidianfar, Ali A. Ghassabi, Mohammad H. Farshidianfar, Mohammad Hoseinzadeh. Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM), 2011.
-
Free Vibration of Thin-walled Cylindrical Shells
Anooshiravan Farshidianfar, Mohammad H. Farshidianfar. 19th Annual International Conference on Mechanical Engineering (ISME), 2011.
Patents
-
System and Method for Closed-loop Monitoring and Control of Material Properties in Thermal Material Processing
Mohammad H. Farshidianfar, Amir Khajepour,Adrian Gerlich. US Patent Granted, US10816491B2, 2016.
-
System and Method for Real-time Closed-loop Control of Material Properties in Laser Material Processing
Mohammad H. Farshidianfar, Amir Khajepour, Adrian Gerlich. Provisional Patent Application, US 62/284,791, 2015.
-
The Process of Manufacturing Pelletizer Rotary Cutter System Using Laser Metal Deposition Process
Mohammad H. Farshidianfar, A. Farshidianfar, S. F. Nabavi, S. Nejati Eghteda, M. Moalei Nediki. Iranian Patent No. 108969, 2023.
-
Integrated Online Monitoring and Control Of Geometrical, Metallurgy, Mechanical Properties and Defects in Thermal Material Processing Processes
Mohammad H. Farshidianfar, A. Farshidianfar, S. F. Nabavi. Iranian Patent No. 108499, 2023.
-
Dissimilar Laser Welding of Aluminum-Stainless steel-Copper Metals
Mohammad H. Farshidianfar, A. Farshidianfar, S. F. Nabavi. Iranian Patent No. 106692, 2022.
-
High Speed Crack Detection Device with Angular Array Used in Flat and Shaped Plates
A. Farshidianfar, Mohammad H. Farshidianfar, S. F. Nabavi, A. Farshidianfar, J. Jahanpour, A. Khatibi. Iranian Patent No. 104838, 2022.
-
Thin-Film Polymer Plate Heat Exchanger with High Pressure Resistance
S. F. Nabavi, A. Farshidianfar, H. Ghoreishi, M. Ali Abadi, Mohammad H. Farshidianfar, S. Shokri. Iranian Patent No. 103844, 2021.
-
Direct Contact Membrane Distillation System with Mesh-Type Spacer Modules
Mohammad H. Farshidianfar, H. Ghoreishi, M. Ali Abadi, S. Marandi. Iranian Patent No. 103299, 2021.